| View previous topic :: View next topic |
| Author |
Message |
Black Bart
New Member
Joined: 06 May 2005
Posts: 3
|
 Posted: Sat May 07, 2005 9:19 pm Post subject: Pinout for Kenwood |
 |
|
I need the pinout for a 16 pin Kenwood wiring harness, I need the wire color and which
pin it connects to on the plug. (KDC-716S)
Thanks,
Black Bart |
|
| Back to top |
|
 |
HOAX
Advanced Member
Joined: 15 Apr 2005
Posts: 131
Location: Driving short bus
|
|
| Back to top |
|
|
Black Bart
New Member
Joined: 06 May 2005
Posts: 3
|
| Posted: Sun May 08, 2005 3:15 pm Post subject: Pinout for Kenwood |
|
|
Nope they dont have that info, they have the wire colors and what they are for but not
the pins that they connect to on the plug.
I have looked at the harnesses for sale on E-Bay but they all show the same side but I
have no idea of the arrangement of the wires on the other side.
Maybe someone has a harness and can give me the info.
Thanks for your reply,
Black Bart |
|
| Back to top |
|
|
HOAX
Advanced Member
Joined: 15 Apr 2005
Posts: 131
Location: Driving short bus
|
| Posted: Sun May 08, 2005 6:28 pm Post subject: |
|
|
What about going to CC or BB and just taking a peek at the harness without opening the bag?
_________________
2003 Audi A4 1.8T
Sound to come! |
|
| Back to top |
|
|
Black Bart
New Member
Joined: 06 May 2005
Posts: 3
|
| Posted: Mon May 09, 2005 9:22 am Post subject: Pinout for Kenwood |
|
|
You know that never occured to me , although I did call a couple of stereo shops and
was told they did not have that info. They farm their repairs out .
But I'll do what you suggested and go to B Buy and see what I can find out.
Thanks,
Black Bart |
|
| Back to top |
|
|
HOAX
Advanced Member
Joined: 15 Apr 2005
Posts: 131
Location: Driving short bus
|
| Posted: Mon May 09, 2005 1:59 pm Post subject: |
|
|
When all else fails, window shop 
_________________
2003 Audi A4 1.8T
Sound to come! |
|
| Back to top |
|
|
Baralheia
New Member
Joined: 17 Apr 2006
Posts: 1
|
| Posted: Mon Apr 17, 2006 5:22 am Post subject: |
|
|
Sorry for the very old thread bump, but for those of you who need this info, I present to you:
Kenwood 16-pin Connector Pinout!
ftp://docs.kenwoodusa.com/pub/ref/7009CON.PDF
The correct pinout is the second rectangular plug on this page, and the diagram displays the wiring as if you were looking at the connector head-on with the wires facing away from you. The retaining clip molded into the connector should be facing to the RIGHT when looking at this diagram.
Enjoy! |
|
| Back to top |
|
|
|
Register
Log in to check your private messages
Log in
